180° double elbow, with solder connection on both sides EN1254, copper, 5060
EN1254 copper 5060
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Air Conditioning and Refrigeration (ACR)
- Compressed air
- Systems for distributing technical and medical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, “wet” DIN 14462
- Sprinkler systems “wet” VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 10 mm |
Nominal diameter 2 | 10 mm |
Length (a) | 30 mm |
Length 2 (b) | 28 mm |
Length 4 (Z/Za) | 20 mm |
Connection type | 1. connection internal soldering, 2. connection internal soldering |
Material | Copper |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
Roofing screw pias® with hexagon head and drill tip
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread (ISO-compliant). Steel, 8.8U, hot-dip galvanised (hdg).
Table-top roll holder For cleaning paper
Work trousers
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Safety shoe S1P
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and cross recess
Cylindrical pin, internal thread C1 hardened ISO 8735 type A (hardened and tempered), C1 stainless steel, with tolerance class m6
Curved shackle A4 stainless steel