1/2 inch impact socket wrench, inch, hex., short
1/2 inch impact socket, hex, imp., short
IMPSKT-1/2IN-SHORT-HEX-INCH-WS7/16
Register now and access more than 125,000 products
With hole for locking pin and groove for O-ring
Datasheets(X)
 | |
Drive | 1/2 inch |
Drive type | Internal square |
Width across flats | 7/16 inch |
Tip type | For outer hexagon |
Length (L1) | 38 mm |
Socket wrench external diameter (D1) | 18 mm |
Socket wrench external diameter 2 (D2) | 24 mm |
Socket wrench depth (t) | 6 mm |
Material | Chrome molybdenum |
Surface | Phosphated |
Last viewed
Standard cable tie with plastic latch
1C assembly foam PURlogic® Easywhite
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Time-Sert® thread repair set, oil drain plug thread M14x1.5 30 pieces
Flat connector contact Micro Timer (MT I) 1.6
Intermediate layer for ISO D clamping system
Pocket tape measure For external and internal measurement
Door handle A 802 on oval escutcheon
Tile spiral wedge In a practical bucket
Change label