1/2 inch supporting joint socket
Socket wrench for supporting joint
SPRTJNTTL-SKTWRNCH-1/2ZO-6KT-SW38
Register now and access more than 125,000 products
- Guarantees optimum and non-slip force transfer of tightening torque of 250 Nm
- Facilitates simultaneous holding of pivot pin while tightening and loosening the nut as well as the use of a 1/2 inch screwdriver
Datasheets(X)
Supporting joint nut for wheel carrier
- W 167 GLE, GLS (front axle+rear axle)
Spring bearing nut on steering knuckle
- W 205 C-Class 4Matic + AMG (saloon, estate, coupé, convertible)
- W 213 E-Class 4MATIC + AMG (saloon, estate)
- W 238 GLC AMG + GLC coupé
- W 257 CLS 50 AMG coupé
- OE number supporting joint flat nut A 002 990 71 54
Width across flats (10) | 38 mm |
Drive (15) | 1/2 inch |
Product weight (per item) (20) | 11 g |
Last viewed
Holder For small abrasives
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Holder For small abrasives
Pan Head screw with hexalobular head ISO 14583, steel 8.8, plain
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Branch connector non-detachable For branch connections in any desired position
Adapter A4 for bi-metal cylinder saw for diameters of 14 to 30 mm
TX bit E 6.3 (1/4 inch) with hole
Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Flywheel (crankshaft) setting pin