1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head
Torque wrench, ratchet, fine head
TRQWRNCH-PSHTHRG-1/2IN-(20-100NM)
Register now and access more than 125,000 products
- Accuracy of ± 3 % to the set value
- Simple and precise setting by turning the handle
- Switchover and/or push-through square drive
- Scaling in both newton metres (Nm) and pound-force feet (lbf·ft)
- Audible and tangible perception of torque triggering prevents over-tightening of bolts
- Anti-slip 2-component handle
- With calibration certificate
Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
Datasheets(X)
After use, relax spring and set to lowest value.
 | |
Tip size | 1/2 inch |
Min./max. torque measuring range | 20-100 Nm |
Min./max. torque measuring range (inches) | 15-80 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Scale value torque | 1 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 350 mm |
Length of lever (L2) | 330 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 37 mm |
Handle diameter (D1) | 37 mm |
Last viewed
Lock set Sundström R06-0703
Cable ties with plastic latch closure – industrial quality
D-G-H/R3R post support bracket
Hygiene kit for ear defenders Uvex 2124098
Connector, pneumatic
Butyl sealing tape
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
18 V M-CUBE W-CONNECT powerpack 3 pieces
Fixed castor For Standard workshop trolleys
Flange cover GPN 670 Polyethylene (PE-LLD), yellow