1-component synthetic resin primer - PRIM-1C-SYNTHRESIN-25KG

1-component synthetic resin primer

Name: 1-component synthetic resin primer
Brand: Würth
SKU: 5866101125

1C synthetic resin primer
PRIM-1C-SYNTHRESIN-25KG

Art.-no. 5866101125

EAN 4047376454699

All versions

Similar products

Prices for customers after login

1-component synthetic resin primer

Art.-no. 5866101125

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-coverage synthetic resin thick-film primer with excellent application properties and active corrosion protection.

Active protection against corrosion thanks to zinc phosphate

Short drying time, high filling power

High degree of stability under load

Application in thick coats

Suitable for electrostatic application

Chromate and lead-free

Solids content of base material: 73%

For indoor and outdoor use

Notice

The surface must have the correct pre-treatment depending on the surface.

Permissible maximum VOC content of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 540 g/l

Max. VOC content of 1-component synthetic resin primer: 496 g/l

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Available colours: FC 0004 = grey, FC 0005 = red brown

As an anti-corrosion primer and intermediate coating on steel, cast metal and sheet metal, e.g. vehicle frames, metal construction, bridge structures, metal tanks, etc.

Can also be used as transport coating in steel construction.

Surfaces:

Painted surfaces

Plain sheet steel

Filled surfaces

Not for galvanised and aluminium surfaces

Cannot be coated with polyester fillers

Can be reworked with PU sealing compounds such as Bond and Seal

Can be painted over with synthetic resin (alkyd) and 2-component acrylic paints

Not suitable for powder coatings (excessive temperatures)

Instructions

Mixture by volume:

Universal thinner, art. no.: 08234406

Diluting adjustment 10 - 15% depending on coat thickness.

Application equipment:

Brush, roller or paint gun, minimum nozzle size 1.4 mm.

Weight of content	25 kg
Chemical basis	Alkyd resin
Available colours	FC 0004 FC 0005
Colour	FC 0004 FC 0005
Drying time	15 min
Conditions for drying time	at 20°C
Max. processing temperature	80 °C
Density	1.507 g/cm³
Density conditions	at 20°C
VOC concentration (CH)	496 g/l
Min. processing temperature	10 °C
Min. proportion of solids	65 %
Shelf life from production	24 Month

Additive article:

Product

Description

Quantity

Price
/PU

Universal thinner For almost all solvent-based paint and primer materials

THINNER-UNI-30LTR

Art.-no. 082344030

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 4

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.