1-component thick-film lacquer

Name: 1-component thick-film lacquer
Brand: Würth
SKU: 5866203205

1C thick-film lacquer
THCKCOATLAC-1C-SATINGLOSS-COLORCAT2-5KG

Art.-no. 5866203205

EAN 4047376455672

All versions

Specification

Primer, corrosion protection and lacquer in a single product.

Excellent corrosion protection properties

Outstanding covering and filling power

Quick drying

Huge time savings

Highly elastic

High degree of shock and impact resistance

Good edge coverage

Excellent rolling and brushing properties

Notice

Protect from frost. Check the colour prior to application. The substrate must have the correct pre-treatment depending on the substrate. The use of a suitable pre-cleaner or a pre-coat is recommended in special cases. For further information, refer to the technical data sheet. For improved resistance to petrol, chemicals and UV, as well as for accelerated drying and improved surface hardness, use hardener thinner instead of universal thinner.

Important!

Specify the colour with RAL or original colour number in item-related text! Your order cannot be processed without this information!

Available colours: See colour index list (Operating instructions 1) in the Documents section

Application area

	Pressure [bar]	Nozzle [mm]	Spray passes	Thinner
Air/flow cup	3-5	1.7-2.5	2 - 3	0-15 %
HVLP	2	1.5-1.8	2 - 3	0-15 %
Brush-on/roll-on	-	-	-	0-5 %
Airless	120 - 150	0.4-0.5	-	-
	-	(65-95°)	1	0-5 %

Drying:
	Dust-dry	Touch-dry	Assembly-ready	Can be painted over
Object temperature 20°C	25-30 minutes	3-4 hours	24 hours	Only with 1-component thick coat lacquer
Object temperature 60°C	10-15 minutes	20-30 minutes	45 minutes	Only with 1-component thick coat lacquer

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For painting containers, chassis, attachments, tractors, agricultural and construction machinery, winter service equipment, gates, frames, troughs and equipment. For use during metalwork on steel structures, railings.

Surfaces:

Hardened old paint

Factory-primed new parts

Bare and zinc-plated steel sheets

Aluminium

GFRP parts

Instructions

Application tools: Brush, roller or paint gun, nozzle size at least 1.9 mm, surface pre-treatment required: clean iron and steel, if necessary sand (remove rust, scale, rolling skin) and degrease with silicone remover.

Technical information

Weight of content	5 kg
Colour	Colour Category 2
Chemical basis	Alkyd resin
Gloss level	Silk gloss
Smell/fragrance	Characteristic
Min. drying time	25 min
Max. drying time	30 min
Conditions for drying time	at 20°C
Max. temperature resistance	130 °C
Max. short-term temperature resistance	150 °C
Density	1.396 g/cm³
Density conditions	at 20°C, DIN 53217
Application conditions	at 10°C and 80% relative humidity
Shelf life from production	36 Month
Max. VOC concentration	420 g/l
VOC concentration (CH)	339.4 g/l
Conditions for permissible VOC concentration	Product category 2(d)
Viscosity/consistency	Liquid
Viscosity	10000 mPas
Viscosity conditions	at 20°C, in accordance with DIN 53211
Conditions for final strength	at 20°C
Surface pre-treatment required	Clean iron and steel, sand if necessary (to remove rust, scale, mill scale) and grease with silicone remover
Conditions for proportion of solids	on the base material
Min./max. proportion of solids	73-77 %
Min./max. yield (area)	5.2-5.7 m²
Min./max. final strength	8 d-10 d

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Hardener thinner

THINNER-HARDENER-PLARSNLAC-1LTR

Art.-no. 5866501101

For accelerated drying of 1-component synthetic enamel paint, 1-component container paint and 1-component high-build paint

x 1 pcs

All-round paint spray gun AP

PNTSPRGUN-SPRAY-ALLROUND-AP

Art.-no. 089170005

Universal high-pressure paint gun suitable for paints, pre-materials and staining

x 1 pcs

All-round paint spray gun AP HVLP

PNTSPRGUN-SPRAY-ALLROUND-(AP/HVLP)

Art.-no. 089170007

Universal low-pressure paint gun for paints, pre-materials and stains

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).