1-component universal primer - PRIM-1C-UNIVERSAL-5KG

1-component universal primer - PRIM-1C-UNIVERSAL-5KG - 1

1-component universal primer - PRIM-1C-UNIVERSAL-5KG - 2

1-component universal primer

Name: 1-component universal primer
Brand: Würth
SKU: 5866100105

1C universal primer
PRIM-1C-UNIVERSAL-5KG

Art.-no. 5866100105

EAN 4047376454583

All versions

Similar products

Prices for customers after login

1-component universal primer

Art.-no. 5866100105

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-filling 1-component acidic primer with good flowing properties and outstanding adhesion on iron, steel, aluminium and zinc.

Short drying time, high filling power

Active protection against corrosion

Suitable for electrostatic application

Chromate and lead-free

Solids content of base material: 36.4%

Notice

Protect from frost. Check the colour prior to application. The base material must have the correct pre-treatment depending on the type of material. The use of a suitable pre-cleaner or a pre-coat is recommended in special cases. For further information, please refer to the technical data sheet. Permissible maximum VOC content of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV). : 780 g/l max. VOC content of 1-component universal primer: 734 g/l.

Cannot be coated with polyester fillers!

Available colours:

FC 0001 = red (only 1 kg and 5 kg container)

FC 0002 = beige

FC 0003 = dark grey

Important! Only enter the colour code (e.g. FC 0001).

Application area

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

1C universal primer is suitable for use as a primer and primer filler. Can also be used as corrosion protection primer in a three-layer structure with 2C HS filler. For fast, cost-effective repairs.

Substrates: Painted surfaces, bare sheet steel, aluminium, zinc-plated surfaces, filled surfaces

Can be painted over with all commercially available top-coat systems

Instructions

Mixture: Dilution adjustment depending on coat thickness, up to 50 %. Acrylic and universal thinner

Application tools: Brush, roller, paint spray gun, minimum nozzle size 1.4 mm.

Weight of content	5 kg
Chemical basis	Polyvinyl butyral
Available colours	FC 0001 FC 0002 FC 0003
Colour	FC 0001 FC 0002 FC 0003
Drying time	5 h
Conditions for drying time	at 20°C
Density	1.04 g/cm³
Max. temperature resistance	120 °C
Max. short-term temperature resistance	150 °C
Density conditions	at 20°C
VOC concentration (CH)	660.1 g/l
Min. proportion of solids	36.4 %
Max. proportion of solids	42 %
Shelf life from production	36 Month

Additional accessory:

Product

Description

Quantity

Price
/PU

Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-NORMAL-5LTR

Art.-no. 08234000

To dilute or to adjust the viscosity of 2-component top coats and 2-component clear coats for painting.

x 1 pcs

Acrylic thinner, short For 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-FAST-5LTR

Art.-no. 08234001

For quicker drying times for paintwork and in cold weather

x 1 pcs

Universal thinner For almost all solvent-based paint and primer materials

THINNER-UNI-30LTR

Art.-no. 082344030

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.