1A assembly cleaner
Assembly cleaner 1A
ASMBYCLNR-1A-60LTR
Register now and access more than 125,000 products
Increased application safety with consistent performance
TÜV-tested explosion and fire behaviour according to test method no. PPP 53285:2006.
Good cleaning performance
- Brake dust, grease and other dirt are removed quickly and reliably.
- Product flashes off quickly with no residue
Significantly reduces the risk potential in the workplace
- Significantly reduced explosion risk in comparison with conventional products
- Minimised fire risk
- Spray can contains non-flammable propellant
- AOX and aromatic compound-free
Silicone-free
Do not spray on hot parts. Check compatibility with plastic and rubber parts and painted surfaces on an invisible area prior to application.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Specially developed parts cleaner for safe cleaning of brake dust, grease, rust and other dirt. For cleaning disc and drum brakes, engine systems, tools of all kinds, assemblies, clutch parts and for other maintenance, repair and assembly work.
Contents | 60 l |
Smell/fragrance | Solvent-like |
Colour | Colourless |
Chemical basis | 2-propanol, white spirit, ketone |
Density/conditions | 0.75 g/cm³ / at 20°C |
Min. flashing point | -26 °C |
Acetone-free | No |
Silicone-free | Yes |
AOX-free | Yes |
VOC-free | No |
Shelf life from production/conditions | 24 Month / at room temperature |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
VLB 60 3D IHV door hinge
Slotted flat-head screw ISO 1580, A4 stainless steel, plain
Waist jacket
Crossover bend, with solder connection on both sides EN1254, copper, 5085
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
3/8-inch socket wrench insert, metric long
Work dungarees
Cube connector
Sandpaper, waterproof Aluminium oxide
Work dungarees