Welcome to Würth Aerospace Solutions For trade customers only

1C painting lacquer AQUA

1C painting lacquer AQUA
THCKCOATLAC-1C-AQUA-SILKGL-COLORCAT2-3KG

Art.-no. 5866302203
EAN 4047376467903

Prices for customers after login
1C painting lacquer AQUA

Art.-no. 5866302203

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Alkyd resin lacquer that can be diluted with water for high-quality lacquering of primed metal surfaces and wooden components for both indoors and outdoors.
  • Can be diluted with water, virtually odourless, highly adhesive

  • Weather-resistant in accordance with VOB Part C, DIN 18 363

  • Highly resistant to UV and weathering

  • Non-sticking, non-fading, breathable

  • Resistant to temporary exposure to fuels

  • Solids content of base material: 46.2%
Notice

Protect from frost. Check the colour prior to application. The substrate must have the correct pre-treatment depending on the substrate. The use of a suitable pre-cleaner or a pre-coat is recommended in special cases. For further information, refer to technical data sheet. Permissible maximum VOC content of product category 1 (d) of the German regulation on Solvent-Based Paints and Coatings (ChemVOC FarbV): 150 g/l Max. VOC content of 1-component coating, colour category 1: 79 g/l.



Important!


Specify the colour with RAL or original colour number in item-related text! Your order cannot be processed without this information!


Available colours: See colour index list (Operating instructions 1) in the Documents section

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For high-quality coating of primed metal surfaces, as well as firmly adhering emulsion- or synthetic resin-based old paints and wooden components for both indoors and outdoors.



Not suitable for powder coatings (temperatures too high)

Instructions
  • Mixture: With water. Diluting adjustment 10-15% depending on coat thickness

  • Application tools: brush, roller or paint gun, minimum nozzle size 1.6 mm

Weight of content

3 kg

Colour

Colour Category 2

Chemical basis

Alkyd resin combination

Gloss level

Silk gloss

Smell/fragrance

Characteristic

Min. drying time

20 min

Max. drying time

30 min

Conditions for drying time

at 20°C

Max. temperature resistance

120 °C

Max. short-term temperature resistance

140 °C

Density

1.18 g/cm³

Density conditions

at 20°C

Shelf life from production

36 Month

VOC concentration (CH)

420 g/l

Viscosity/consistency

Liquid

Viscosity conditions

at 20°C, in accordance with DIN 53211

Min./max. proportion of solids

46.2-56 %

Min./max. yield (area)

6-7 m²

Drying
Dust-dryTouch-dryAssembly-readyCan be painted over
Object temperature 20°C20-30 minutes40-45 minutes24 hours1 hour
Suitable glove:
 
Product
Description
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 6
Gas-tight and resistant to exhaust gases produced by combustion processes
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information