1C synthetic resin primer
PRIM-1C-SYNTHRESIN-25KG
Art.-no. 5866101125
EAN 4047376454699
Register now and access more than 125,000 products
- Zinc phosphate for active corrosion protection
- Short drying time, high filling power
- High degree of stability under load
- High-build application
- Suitable for electrostatic application
- Chromate and lead-free
- Solids content of base material: 73 %
- Can be used indoors and outdoors
The base material must have the correct pre-treatment depending on the type of material.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
As an anti-corrosion primer and intermediate coating on steel, cast metal and sheet metal, e.g. vehicle frames, metal construction, bridge structures, metal tanks etc. Can also be used as transport coating in steel construction. Base materials: Painted surfaces Bare sheet steel Filled surfaces Not for zinc-plated and aluminium surfaces. Cannot be coated with polyester fillers. Reworking with PU sealants, e.g. Bond+Seal Can be painted over with synthetic resin (alkyd) and 2-component acrylic paints. Not suitable for powder coatings (temperatures too high) Available colours: FC 0004 = grey, FC 0005 = red brown
Mixture by volume: Universal thinner, art. no.: 08234406. Diluting adjustment 10 % to 15 % depending on coat thickness
Application tools: Brush, roller or paint spray gun, minimum nozzle size 1.4 mm
Weight of content | 25 kg |
Chemical basis | Alkyd resin |
Available colours | FC 0004, FC 0005 |
Colour | FC 0004, FC 0005 |
Drying time | 15 min |
Conditions for drying time | at 20°C |
Max. processing temperature | 80 °C |
Density | 1.507 g/cm³ |
Density conditions | at 20°C |
VOC concentration (CH) | 496 g/l |
Min. processing temperature | 10 °C |
Min. proportion of solids | 65 % |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
ASME B18.6.3 sst. 18-8 plain hex. washer hd.
Occupational shoes
Hexagon bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Countersunk rivet
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Cut protection glove Ejendals TEGERA® 465A
Spacer stud, polyamide, hex, F/F
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-nickel silver (ZNSH)