1C window adhesive Ultimate
Windscreen/window adhesive Ultimate
WNDWADH-ULTIMATE-CARTRIDGE-310ML
Register now and access more than 125,000 products
Can be used in almost any season
- 1-hour drive-away time for vehicle with airbag at an ambient temperature of -10 °C to +35 °C
- See technical data sheet for drive-away times for larger vehicles
- Suitable for vehicles with driver assistance systems
Safety tested
- Car drive-away time confirmed with crash test and TÜV certificate in accordance with FMVSS208/212
- Meets OEM requirements (original equipment manufacturers, vehicle manufacturers)
- High-modulus vehicle-strengthening window adhesive
- Suitable for aerials, non-conductive
- Ideal for use on aluminium, magnesium and hybrid bodywork, as it prevents contact corrosion
Do not park the vehicle on a lifting platform. Observe the information regarding bead geometry provided by the vehicle manufacturer. The application and drive away times must be observed. The curing time and flash-off time depend on the ambient temperature and humidity.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
High-quality 1-component window adhesive for all types of vehicles that can be used in almost any season.
Ensure that the material is applied in a clean working environment. It is essential to use the product with the accompanying Würth system components to ensure correct and faultless work. The work instructions provided with the product must be followed during application. A Varioprimer must be applied to freshly painted surfaces. The coating must be allowed to cure completely before the Varioprimer is applied. For more information, please refer to the technical data sheet.
Contents | 310 ml |
Container | Cartridge |
Chemical basis | Moisture curing 1K polyurethane |
Colour | Black |
Min. skin-formation time | 15 min |
Density/conditions | 1.27 g/cm³ / at 20°C |
Drive-away time conditions | at ambient temperature -10°C to 35°C |
Max. open time /conditions | 15 min / at 23°C and 50% humidity |
Min./max. processing temperature | 5 to 35 °C |
Min./max. temperature resistance | -40 to 120 °C |
Tensile shear strength | 5.5 MPa |
Shelf life from production/conditions | 12 Month / at 5°C to 25°C |
Tensile strength | 9 MPa |
Smell/fragrance | Odourless |
Shore A hardness | 60 |
Product weight (per item) | 422.000 g |
Shelf life from production | 12 Month |
Density | 1.27 g/cm³ |
Full curing speed | 4 mm/d |
Drive-away time (with airbag) | 1 h |
Drive-away time (without airbag) | 30 min |
Breaking elongation | 300 % |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with metallic sealing edge, shape B
Three-punch expander pliers Three-punch pliers
Gripper ring
System bolt For system connector SV 20 E
Stretch X trousers
Alignment tool For balance shaft FCA 0.9 Twinair
Oil filter chain
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Connection sleeve with bolt For system connector SV 20 E
Reamer Square