2-component HS top coat

Name: 2-component HS top coat
Brand: Würth
SKU: 5866202204

2C-HS top coat
TOPCOAT-2C-SATINGLOSS-COLORCAT2-3LTR

Art.-no. 5866202204

EAN 4049557639536

All versions

Prices for customers after login

2-component HS top coat

Art.-no. 5866202204

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-solid HS acrylic paint with high degree of resistance to UV and weathering.

Quick to dry

Excellent running properties

High coat thickness

High degree of resistance to scratches, impacts and shocks

Excellent resistance to solvents, petrols, greases and low-concentrate acids and bases

Excellent resistance to UV and weathering

Solids content of base material: 75.8%

Notice

Protect from frost. Check the colour prior to application. The substrate must have the correct pre-treatment depending on the substrate. The use of a suitable pre-cleaner or a pre-coat is recommended in special cases. For further information, please refer to the technical data sheet. Permissible maximum VOC content of product category 2 (e) of the German regulation ChemVOC FarbV: 420 g/l. Max. VOC content of 2-component HS top coat: 417 g/l.

Important!

Specify the colour with RAL or original colour number in item-related text! Your order cannot be processed without this information!

Available colours: See colour index list (Operating instructions 1) in the Documents section

Application method:
	Pressure [bar]	Nozzle [mm]	Spray passes	Thinner
Air/flow cup	3 - 5	1.3-1.5	1-2	15-20 %
HVLP	2
Nozzle internal pressure: 0.7 bar	1.3-1.4	1-2	15-20 %
Brush on/roll on				0-5 %
Airless	120 - 150	0,28	1	5-15 %
To prevent excessively thick coats (very high solids content due to HS quality), always observe the recommended number of spray passes. Always check colours after adding hardener.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For painting commercial vehicles, agricultural machinery, tractors, machines and attachments. Can be used for high-quality painting in trade fair and model construction.

Instructions

Mixture by volume: 3:1 with 2C-HS hardener for top coats, acrylic thinner, dilution ratio 5-10 vol.% depending on the layer thickness. When using competitor 2-component hardener products, the mixing ratio of the respective competitor must be used.

The base material must have the correct pre-treatment depending on the base material! Application tools: Paint gun, minimum nozzle size 1.3 mm.

Contents	3 l
Chemical basis	Polyurethane acrylic
Smell/fragrance	Characteristic
Colour	Colour Category 2
Gloss level	Silk gloss
Drying time	50 min
Conditions for drying time	at 20°C
Max. temperature resistance	180 °C
Density	1.305 g/cm³
Density conditions	at 20°C, DIN 53217
VOC concentration (CH)	417 g/l
Ignition temperature	370 °C
Min. proportion of solids	71.6 %
Application conditions	at 10°C and 75% relative humidity
Water-soluble	No
Resin-free	No
Unleaded	Yes
Chlorine-free	Yes
Acid-free	Yes
Silicone-free	Yes
Viscosity/consistency	Liquid
Min. yield (area)	10 m²
Max. yield (area)	14 m²
Shelf life from production	36 Month

Drying:
	Dust-dry	Touch-dry	Assembly-ready	Can be painted over
Object temperature 20°C	45-55 minutes	5-6 hours	12-24 hours	With all top coats
Object temperature 60°C	10-15 minutes	25-30 minutes	once cooled	With all top coats

Additional accessory:

Product

Description

Quantity

Price
/PU

Wega® safety goggles

SAFEGOGL-WEGA-CLEAR

Art.-no. 0899102115

Sporty safety glasses with perfect all-around protection

x 1 pcs

Full-vision goggles FS503

FULLVISNGOGL-FS503-CLEAR

Art.-no. 0899102489

Elegant and timeless full-vision goggles with subdued colouring

x 10 pcs

Half face mask HM 175

HALFMASK-HM175-EN141-DBFILTCON

Art.-no. 0899175000

Tight-fitting breathing protection for maximum comfort

x 1 pcs

Gas filter A2 For breathing protection series 175

GASFILT-(F.BREASERIE-175)-A2

Art.-no. 0899175010

x 10 pcs

Combination filter A2P3 RD For breathing protection series 175

COMBIFILT-(F.BREASERIE-175)-A2P3RD

Art.-no. 0899175011

x 8 pcs

Particle pre-filter pad P2 R For breathing protection series 175

PARTCLPREFILT-F.HALFMASK-P2R-SERIE175

Art.-no. 0899175014

For extending filters A2 and ABEK1

x 20 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-NORMAL-5LTR

Art.-no. 08234000

To dilute or to adjust the viscosity of 2-component top coats and 2-component clear coats for painting.

x 1 pcs

Acrylic thinner, short For 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-FAST-5LTR

Art.-no. 08234001

For quicker drying times for paintwork and in cold weather

x 1 pcs

2-component HS hardener for top coats

HARD-LAC-TOPCOAT-2C-5LTR

Art.-no. 5866400105

Perfectly suited for use with 2-component HS acrylic paint, 2-component clear varnish and 2-component thick coat lacquer.

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 2

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.