2-way blow-out gun With a control button for the infinitely variable adjustment of air flow
Two-way pneumatic blow-out gun
BLWOUTGUN-(2 WAY)-W.REGULATOR-SERIES2000
Register now and access more than 125,000 products
- Scratch-resistant nozzle tip prevents damage and protects delicate workpieces
- Includes a long additional nozzle for working in hard-to-reach areas
- Rubberised ergonomic soft grip provides a non-slip hold and also helps to insulate against cold
- Thanks to the 2-way air inlet, the plug-in air-supply nipple can be attached to the top or bottom as desired
Datasheets(X)
For the removal of dirt and other foreign bodies, e.g. in workshops and woodworking operations.
Unscrew the plug-in nipple using an open-ended spanner SW 14 and the plug using a slotted screwdriver. The plug-in nipple and the plug can now be swapped over and screwed into the respective openings.
Design | 2-fold |
Pipe length | 120 mm |
Air consumption | 330 l/min |
Max. operating pressure | 6.3 bar |
Material | Aluminium |
Nozzle hole diameter | 2.5 mm |
Last viewed
VDE wire stripping pliers, IEC 60900
Weatherproof jacket
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
ORSY®BULL series 7 drawer box
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Lock nut DIN 7967, A2 stainless steel, plain
Support clip, type BB
Paint brush For water-based lacquer and paint systems
Threaded fitting