2C super nippers
2C super nippers
SDCTR-SUPERKNIPS-SR-HARDWIRE
Register now and access more than 125,000 products
- Standard: DIN ISO 9654
- Ergonomic 2-component grip
- Joint with stainless steel rivet, opening spring and opening limiter
- Non-chamfered cutting; precision-ground for sharp, flush cutting
 | |
Length | 125 mm |
Jaws width | 13.5 mm |
Cutting edge length | 9 mm |
Jaws thickness | 7.5 mm |
Min./max. soft wire diameter cutting capacity | 0.2-1.6 mm |
Max. medium wire diameter cutting capacity | 1.2 mm |
Material | Tool steel |
Design | Normal head size |
Surface | Burnished |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Work poloshirt
Plus Quadro-L Vario hammer drill bit
EPS profile double cylinder
Fastening clip
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Integra H85 single-walled frame
Flat head tapping screw, type C with hexagon socket ISO 14585, A2 stainless steel, shape C (with tip)
A 310 Click door handle
