2C super nippers
2C super nippers
SDCTR-SUPERKNIPS-SR-WIREHOLDER
Register now and access more than 125,000 products
- Standard: DIN ISO 9654
- Ergonomic 2-component grip
- Joint with stainless steel rivet, opening spring and opening limiter
- Non-chamfered cutting; precision-ground for sharp, flush cutting
Datasheets(X)
 | |
Length | 125 mm |
Jaws width | 12.5 mm |
Cutting edge length | 9 mm |
Jaws thickness | 7.5 mm |
Min./max. soft wire diameter cutting capacity | 0.2-1 mm |
Material | Tool steel |
Design | Narrow head |
Surface | Burnished |
Last viewed
45° angled tube cable lug Standard (similar to DIN)
Polo shirt Motion Tex Light 7010 logo Schwabenhaus
Additional print costs for NPH Twin-Fixx
Plus Quadro-L hammer drill bit
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Drawer cabinet PRO 550
Protective apron
Thread-rolling screw
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Castellated nut, low profile with fine thread DIN 937, steel 17H/22H, zinc-plated, blue passivated (A2K)