2C universal primer - PRIM-2C-UNIVERSAL-5KG

2C universal primer

Name: 2C universal primer
Brand: Würth
SKU: 5866103105

Primer 2C universal primer
PRIM-2C-UNIVERSAL-5KG

Art.-no. 5866103105

EAN 4047376454934

All versions

Similar products

Individual price display after login

2C universal primer

Art.-no. 5866103105

Individual price display after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Primer with excellent adhesion and with good filling properties (up to 100 µm) and outstanding protection against corrosion

Fast-drying primer coating with excellent filling properties

Excellent corrosion protection

Wet-on-wet application possible

Excellent adhesion on iron, steel, GFRP, aluminium and galvanised surfaces

Can be painted over with all commercially available one-component and two-component paints (except solvent-based double-layer base paints)

Permissible maximum VOC content: 540 g/l of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV). Max. VOC content: 517 g/l

Solids content of base material in %: 70.2

Can be painted with all commercially available paints

Cannot be covered

Available colours: FC 0006 = light grey

Notice

The surface must have the correct pre-treatment depending on the surface. Important: Specify the colour code in item-related text! E.g.: FC 0006 for light grey. Not suitable for powder coatings

Application area

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

As an adhesion promoter for surfaces difficult to paint, such as aluminium, zinc, copper, brass and GFRP. A 1-component plastic adhesive primer must first be applied to plastics. As a priming filler for levelling out minor damage or sanding grooves. Surfaces: Painted surfaces, iron, steel, aluminium, zinc-plated surfaces, wood, GFRP. Available colours: FC 0006 = light grey

Instructions

Mixture by weight: 10: 1 with primer hardener with acrylic thinner 15-20 % depending on the layer thickness. Can be dyed up to 10 % with 2C acrylic paints. Application tools: Brush, roller or paint spray gun, nozzle size at least 1.4 mm.

Weight of content	5 kg
Chemical basis	Two-component acrylic
Available colours	FC 0006
Colour	Light grey
Yield (area)	9 m²
Density	1.483 g/cm³
Max. temperature resistance	150 °C
Max. short-term temperature resistance	180 °C
Density conditions	at 20°C
Min. processing temperature	10 °C
Min. proportion of solids	63.5 %
Conditions for proportion of solids	on the base material
Max. proportion of solids	65 %
Max. VOC concentration	517 g/l
Max. permissible VOC concentration	540 g/l
Conditions for permissible VOC concentration	Product category 2(e)
Conditions for VOC concentration	ChemVOCFarb

Required accessory:

Product

Description

Quantity

Price
/PU

2-component primer hardener

HARD-LAC-PRIMER-2C-1LTR

Art.-no. 5866401101

For use with 2-component HS filler, 2-component universal primer

x 1 pcs

2-component primer hardener

HARD-LAC-PRIMER-2C-5LTR

Art.-no. 5866401105

For use with 2-component HS filler, 2-component universal primer

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU

Acrylic thinner for 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-NORMAL-5LTR

Art.-no. 08234000

To dilute or to adjust the viscosity of 2-component top coats and 2-component clear coats for painting.

x 1 pcs

Acrylic thinner, short for 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-FAST-5LTR

Art.-no. 08234001

For quicker drying times for paintwork and in cold weather

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove nitrile with backing fabric

Description:

Permeation level: 1

Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort

Vinyl chemical and moisture protective glove

Description:

Permeation level: 2

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 3

Gas-tight and resistant to exhaust gases produced by combustion processes

Chemical protective glove PVC w. backing fabric

Description:

Permeation level: 2

Very robust, submersible PVC glove with cotton support fabric

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 2

Chemical protective glove chloroprene

Description:

Permeation level: 1

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.