3/4-inch lever ratchet
Lever ratchet, 3/4 inch
LEVR-REVERSIBLE-RATCHT-3/4IN
Register now and access more than 125,000 products
- Equipped with 36 teeth and two-stage (double) catches.
- The two catches are firmly anchored in the ratchet head the springs are also fixed.
- The power of the ratchet gear is transferred vertically to the catches, therefore avoiding the ratchet mechanism skipping.
Datasheets(X)
Suitable for use in the commercial vehicle sector as well as for construction and agricultural machinery
Length of lever | 1000 mm |
Drive | 3/4 inch |
Ratchet diameter | 80 mm |
Surface | Chromed high-gloss satin finish |
Material | Steel |
Material of handle | Steel |
Product weight (per item) | 2800.000 g |
Last viewed
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain
Vulcanised fibre disc CS 570 Klingspor
Floor panel
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Button-head rivet
Safety sandals, S1
Hammer drill bit Plus Duo-S Vario
Low-cut safety shoes S1