Welcome to Würth Aerospace Solutions For trade customers only
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM 3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM 3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM 3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM 3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM 3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM - 1
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM - 2
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM - 3
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM - 4
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM - 5
3D hinge dia. 16 mm With three bolts on the frame section - HSEDRHNGE-3D-(ZN)-D16MM - 6

3D hinge dia. 16 mm With three bolts on the frame section

3-D house door hinge, D 16 mm with 3 bolts
HSEDRHNGE-3D-(ZN)-D16MM

Art.-no. 0686343245
EAN 4050382489432
All versions

Prices for customers after login
3D hinge dia. 16 mm With three bolts on the frame section

Art.-no. 0686343245

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Can be adjusted in three directions without removing, wedging or opening the door leaf.
  • The three bolts on the frame section of the hinge provide the best possible anti-torsion and tilting protection

  • Only one tool required to adjust the hinge (hexagon socket size 4)
Proof of Performance
Notice

To ensure that the entire height adjustment can be utilised, an upper rebate space of 6 mm should be provided.


For soft and light woods like fir, pine, spruce etc. we recommend using a drill bit with a diameter of 6.8 mm.

Application area

Specified dimensions not binding. Subject to technical changes!

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Cover cap for 3D hinges
Cover cap for 3D hinges

CAP-(F.HNGE-3D)-ALU-F1-SILVR-D16MM

With 3 bolts on the frame section.
x 20 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
T-handle wrench, hexagon socket With side tip
T-handle wrench, hexagon socket With side tip

SCRDRIV-HNDL-T-HEXSKT-4X200

ZEBRA
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV<SUP>®</SUP> drive
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive

BIT-HEXSKT-WS4-1/4IN-L25MM

x 5 pcs
Installation accessories for 3D hinges
Installation accessories for 3D hinges

AY-HOLEGAUGE-LEAFDRLJIG-BA/3D-D16MM

For 16 mm hinge with 3 bolts on frame part
x 1 pcs
Drill gauge For 3D hinges with 3 bolts, 16 mm
Drill gauge For 3D hinges with 3 bolts, 16 mm

DRLJIG-F.LEAFDRLJIG-(HNGE-D16MM)

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details