3D hinge dia. 18 mm
3D hinge for internal doors, dia. 18 mm
HSEDRHNGE-3D-D18MM
Art.-no. 0686343250
EAN 4045727906095
Register now and access more than 125,000 products
- The three bolts on the frame section of the hinge provide the highest anti-twisting and anti-tilting protection.
- The hinge can be adjusted with just one tool (Allen key 5).
To ensure that the entire height adjustment can be used, an overlay space of more than 6 mm must be provided.
For soft wood like fir, pine, red fir etc., an 8.3 mm diameter tip should be used.
| Load capacity reference values for a load capacity of approximately 1,800-2,100 mm in height | |||
| Door width in mm | with 2 hinges | with 3 hinges | with 4 hinges |
| up to 800 | 100 kg | 150 kg | 150 kg |
| up to 900 | 100 kg | 125 kg | 150 kg |
| up to 1,000 | 75 kg | 125 kg | 150 kg |
| up to 1,100 | - | 100 kg | 150 kg |
| up to 1,200 | - | 100 kg | 150 kg |
Specified dimensions are not binding. Subject to technical changes.
Datasheets(X)
Can be used for DIN RH or DIN LH compliant doors.
For hinged wooden doors.
 | |
Suitable for | Rebated wooden doors |
Material | Steel |
Surface | Zinc plated |
Roll diameter | 18 mm |
DIN direction | DIN R/L |
Load capacity with 2 hinges | 75 kg |
Load capacity with 3 hinges | 100 kg |
Load capacity with 4 hinges | 150 kg |
Side adjustment | +/- 4 mm |
Height adjustment | + 4 mm |
Depth adjustment | +/- 4 mm |
Min. flashover strength | 16 mm |
Roll height | 139 mm |
Length of tenon on frame part | 55 mm |
Length of tenon on leaf part | 55 mm |
Internal drive | HS5 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
