Welcome to Würth Aerospace Solutions For trade customers only
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM 3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM 3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM 3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM 3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM 3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM - 1
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM - 2
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM - 3
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM - 4
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM - 5
3D hinge dia. 18 mm - HSEDRHNGE-3D-D18MM - 6

3D hinge dia. 18 mm

3D hinge for internal doors, dia. 18 mm
HSEDRHNGE-3D-D18MM

Art.-no. 0686343250

EAN 4045727906095

All versions

Individual price display after login
3D hinge dia. 18 mm

Art.-no. 0686343250

Individual price display after login
Quantity
PU
x 10 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Can be adjusted in three directions without removing, jamming or opening the door.
  • The three bolts on the frame section of the hinge provide the highest anti-twisting and anti-tilting protection.

  • The hinge can be adjusted with just one tool (Allen key 5).
Notice

To ensure that the entire height adjustment can be used, an overlay space of more than 6 mm must be provided.


For soft wood like fir, pine, red fir etc., an 8.3 mm diameter tip should be used.

Application area
Load capacity reference values for a load capacity of approximately 1,800-2,100 mm in height
Door width in mmwith 2 hingeswith 3 hingeswith 4 hinges
up to 800100 kg150 kg150 kg
up to 900100 kg125 kg150 kg
up to 1,00075 kg125 kg150 kg
up to 1,100-100 kg150 kg
up to 1,200-100 kg150 kg

Specified dimensions are not binding. Subject to technical changes.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Can be used for DIN RH or DIN LH compliant doors.



For hinged wooden doors.

Suitable for

Rebated wooden doors

Material

Steel

Surface

Zinc plated

Roll diameter

18 mm

DIN direction

DIN R/L

Load capacity with 2 hinges

75 kg

Load capacity with 3 hinges

100 kg

Load capacity with 4 hinges

150 kg

Side adjustment

+/- 4 mm

Height adjustment

+ 4 mm

Depth adjustment

+/- 4 mm

Min. flashover strength

16 mm

Roll height

139 mm

Length of tenon on frame part

55 mm

Length of tenon on leaf part

55 mm

Internal drive

HS5

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Trim cap for 3D hinges
Trim cap for 3D hinges

CAP-(F.HNGE-3D)-ALU-SILVR-D18MM

With three bolts on the frame section
x 20 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
T-handle hexagon socket with ball head
T-handle hexagon socket with ball head

SCRDRIV-HNDL-T-HEXSKT-BALHD-5X200

Side tip
x 1 pcs
C 6.3 bit hexagon socket (1/4 inch)
C 6.3 bit hexagon socket (1/4 inch)

BIT-HEXSKT-WS5-1/4IN-L25MM

x 5 pcs
Assembly accessories for 3D hinges
Assembly accessories for 3D hinges

AY-HOLEGAUGE-LEAFDRLJIG-BA/3D-D18MM

For 18 mm hinges with 3 bolts on the frame side
x 1 pcs
Drilling jig for 3D hinges with three bolts, 18 mm
Drilling jig for 3D hinges with three bolts, 18 mm

DRLJIG-F.LEAFDRLJIG-(HNGE-D18MM)

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details