3M Cubitron II grinding disc
Grinding disc 3M Cubitron II
65494 CUBITRONII DCGW T27-230X7X22,2
Register now and access more than 125,000 products
- Patented 3M Precision grain with geometrically defined cutting edges
- Hard resin bond
- Immediate entry into solid material
- Rapid cool grinding and optimised sanding processes
- Improved wear behaviour for rough grinding disc
- Optimum service life thanks to low pressure
- Up to 70% reduction in force required with the same removal rates as other premium products
- Significantly less effort and stress for the user (immediately noticeable)
- Up to three times higher throughput and significant time savings
Datasheets(X)
Chamfering, grouting, removing weld seams, coarse grinding, fillet weld grinding, dressing.
Diameter x thickness | 230 x 7 mm |
Drill hole | 22.2 mm |
Design | Cranked |
Last viewed
Occupational shoes
Stud with threaded end ≈ 2d
Time-Sert® drill bit
T-handle, TX with side tip
1/2 inch impact socket wrench set inch hexagon Short, 11 pieces
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Universal milling gauge body 118 A
T-piece, reduced with solder connection EN1254, copper, 5130R