45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M10-10SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 10 mm² |
Flange hole | M10 |
Wire diameter (d1) | 4.5 mm |
Diameter of hole (d2) | 10.5 mm |
Sleeve length (a) | 10 mm |
Width (b) | 17 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Mobile universal flanging tool
System case empty range 8.4.1
Battery powered 12 V LED hand-held spotlight With five different light modes
Double pipe nipple imperial thread
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Pin punch
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
ASSY® 4 PII CSMP universal screw Steel zinc-plated partial thread with underhead thread milling pocket head
EPS profile double cylinder