45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M10-120SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 120 mm² |
Flange hole | M10 |
Wire diameter (d1) | 15 mm |
Diameter of hole (d2) | 10.5 mm |
Sleeve length (a) | 26 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Guide head For CPS cable feed devices (apart from CPS 1)
1/2 inch impact socket wrench, inch, hex., short
Hexagon Socket Head Cap Screw
AL 100 door handle pair
Door handles Flat on exterior plate
System workshop trolley BASIC 8.4
Non-slip mat For CLIP-O-FLEX® tray Keyboard
CUT+COOL drilling and cutting oil
Work jacket
KL draw bolt For M12-M63 and PG9-PG48 hole punchers