45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M10-50SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 50 mm² |
Flange hole | M10 |
Wire diameter (d1) | 10 mm |
Diameter of hole (d2) | 10.5 mm |
Sleeve length (a) | 19 mm |
Width (b) | 20 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
ASME B18.3 Alloy A574 zinc flake silver (ZFSHL)
Threaded pin ISO 4027, steel, 45H, plain
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
ORSY®BULL partition elements For dividing ORSY®BULL top loader boxes according to individual requirements
Specially fused alumina sanding tip, pink
Draco parka
Installation box, bath tub, flush-mounted mixer, masonry
System workshop trolley BASIC 8.4
Akura 44 profile thumbturn cylinder
Polishing pads