45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M10-6SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 6 mm² |
Flange hole | M10 |
Wire diameter (d1) | 3.5 mm |
Diameter of hole (d2) | 10.5 mm |
Sleeve length (a) | 9 mm |
Width (b) | 17 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Cable tie with fastening tab, re-openable
Inductive charging station 12 V For cordless charging of devices with induction batteries
Sealing washer
Banjo bolt DIN 7643, steel, zinc-nickel silver-plated (ZNSHL), long version
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Work dungarees
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with o-ring