45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M12-16SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 16 mm² |
Flange hole | M12 |
Wire diameter (d1) | 5.5 mm |
Diameter of hole (d2) | 13.2 mm |
Sleeve length (a) | 13 mm |
Width (b) | 19 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Concealed slide full-extension slide Dynapro With integrated soft-close system
Fixanchor W-FAZ/HCR
Work shirt Classic graphite T-shirt
Work sweatshirt
Safety glasses uvex pheos cx2 9198
Washer ISO 7091 steel 100 HV zinc-plated, blue passivated (A2K)
Bergen parka
VDE screwdriver For hexagon drive
Collet chuck set For use in tool holder for thermic drill bit
VS SUB SIDE diagonal cupboard pull-out