45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M16-120SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 120 mm² |
Flange hole | M16 |
Wire diameter (d1) | 15 mm |
Diameter of hole (d2) | 17 mm |
Sleeve length (a) | 26 mm |
Width (b) | 30 mm |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Countersunk screw with hexalobular head ISO 14581, steel 8.8, zinc flake, silver (ZFSHL)
Flat washer For hexagon head bolts and nuts
Compartment rail For drawer cabinets made from zinc-plated sheet steel with slots on both sides
Gas filter SR 518 A2 Sundström H02-7012
Die set/kit Ruko thread cutting tool set HSS 37 pieces
Ring nut DIN 582, steel C15E, plain
EPS profile thumbturn cylinder
ASSY® 4 CSMP universal screw Zinc-plated steel full thread 90° milling pocket head
Metal core drill bit Ruko HSS TiAlN Weldon holder