45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M8-120SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 120 mm² |
Flange hole | M8 |
Wire diameter (d1) | 15 mm |
Diameter of hole (d2) | 8.4 mm |
Sleeve length (a) | 26 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Clip, metric
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Profile half cylinder EPS
1/2 inch socket wrench insert, metric
New Lotus S3 safety boots
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Work trousers
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Work shorts