45° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 45 degree
TUBANGLCBLLUG-45DGR-M8-95SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 95 mm² |
Flange hole | M8 |
Wire diameter (d1) | 13.5 mm |
Diameter of hole (d2) | 8.4 mm |
Sleeve length (a) | 25 mm |
Width (b) | 26 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagonal bolt with flange
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Transport box for box material lift
EPS profile double cylinder
Jacket Planam Highline
Work dungarees
Hexagon head bolt MS90725, steel GR5, cadmium-plated
Wet sandpaper sheet Klingspor PS 11 C
Positive mixer For liquid anchor WIT-FIX