45° connection piece For hard-to-reach lubrication and manifold points
Connection piece 45 degree
FITT-CLS-ANGLPIECE-45D-M8X1KEG-M8X1
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For connection of a line to a lubrication or divider manifold point if an insertable or cutting-ring fitting cannot be screwed in directly.
 | |
Connection thread (d2) | M8 x 1 |
Outlet thread (d) | M8 x 1 tapered |
Width across flats (SW) | 13 mm |
Length (L) | 23 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Number plate drilling screw pias®
Safety boots S3
Twist drill SC, WN 25, type N, internal cooling, TiAlN-UV
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Slotted flat-head screws with shoulder DIN 923, steel 5.8, zinc-plated, blue passivated (A2K)
Wood screw, DIN 95 brass Raised countersunk head, slotted
Pipe and fastening clamp Multifix
Hoodie with zip Organic cotton W280
Self-tapping thread inserts with cutting hole
Protective glove, knitted and coated