45° elbow, with solder connection and plug-in end EN1254, copper, 5040
EN1254 copper 5040
FITT-LOET-EN1254-ILE/ALE-45G-CU-28/5040
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Air Conditioning and Refrigeration (ACR)
- Compressed air
- Systems for distributing technical and medical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, “wet” DIN 14462
- Sprinkler systems “wet” VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 28 mm |
Nominal diameter 2 | 28 mm |
Length (a) | 29 mm |
Length 2 (b) | 31 mm |
Length 4 (Z/Za) | 10 mm |
Connection type | 1. connection internal soldering |
Material | Copper |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
Wedge lock washer Nord-Lock, wide shape (NLspss)
GPN 690 protective cap Polyethylene (PE-LD/PE-LLD), yellow
Screw, hexagon head, inch
Write-on cable tie with plastic latch
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Thread cutter for TIME-SERT® Made of HSS
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)
Stud with head, shape B
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
MG-ZD 21 designer furniture handle