45° elbow, with solder connection on both sides EN1254, copper, 5041
EN1254 copper 5041
FITT-LOET-EN1254-ILE-45GRAD-CU-76/5041
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Air Conditioning and Refrigeration (ACR)
- Compressed air
- Systems for distributing technical and medical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, “wet” DIN 14462
- Sprinkler systems “wet” VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 76 mm |
Nominal diameter 2 | 76 mm |
Length (a) | 90 mm |
Length 4 (Z/Za) | 57 mm |
Connection type | 1. connection internal soldering, 2. connection external soldering |
Width across flats (S/S1) | 0 - not applicable |
Width across flats 2 (S2) | 0 - not applicable |
Material | Copper |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
Rivet nut with flat head and knurled shank
Fully threaded hexagonal bolt and fine thread
Grinding disc for exposed concrete
Universal holder E 6.3 (1/4") With quick-change chuck
Cavity wall connection box With screw cover
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Slotted flat-head screws with small head DIN 920, A1 stainless steel, plain
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Akura 44 profile thumbturn cylinder
Hot air blower HLG 2300-E POWER