45° tubular angle cable lug Commercially available (similar to DIN) without UL approval
Tubular angle cable lug 45° without UL approval
TUBANGLCBLLUG-45DGR-M6-6SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. according to DIN EN 60228 Class 2
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
Wire cross section | 6 mm² |
Flange hole | M6 |
Wire diameter (d1) | 3.5 mm |
Diameter of hole (d2) | 6.4 mm |
Sleeve length (a) | 9 mm |
Width (b) | 12 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Pan head screw with Z cross recess DIN 7985, steel 4.8, plain
Half cylinder S5 locking system
Install. box, kitchen sink, dry walling
WÜPOFAST® A2 chipboard screw A2 stainless steel, full thread, raised countersunk head, PZ
System insert, plastic, 4.4.1
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3729
EPS profile thumbturn cylinder
EPS profile double cylinder
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Locking system DUAL