90° angled adjustable sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Adjust. Seal. cone elbow fitting ST 90° with O-ring
TUBFITT-ISO8434-L-SWOE-ST-D18-M26X1,5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M26 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M26 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 400 |
Pipe diameter (D1) | 18 mm |
Diameter 2 (D2) | 15 mm |
Diameter 3 (D3) | 13 mm |
Width across flats (S1) | 24 mm |
Width across flats 3 (S3) | 32 mm |
Material | Steel |
Surface | Zinc nickel |
Length 2 (L2) | 31 mm |
Length 3 (L4) | 23.5 mm |
Length 4 (L4) | 35.4 mm |
Last viewed
pias® wing-type drilling screw, countersunk head with AW drive
Snap ring shape SW for shaft
90° elbow, with solder connection and plug-in end EN1254, copper, 5001A
ASSY®plus VG 4 ETX construction screw Steel zinc plated full thread external TX
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Hexalobular-type cheese head screw, low head ISO 14580, steel 8.8, zinc flake, silver (ZFSHL)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Cylinder tapping screw, C shape with hexagon socket