90° angled adjustable sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Adj. seal. cone elbow fitting ST 90° with O-ring
TUBFITT-ISO8434-S-SWOE-ST-D20-M30X2
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M30 x 2 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M30 x 2 |
ISO | 8434 |
Nominal pressure PN | 420 |
Pipe diameter (D1) | 20 mm |
Diameter 2 (D2) | 16 mm |
Diameter 3 (D3) | 14 mm |
Width across flats (S1) | 27 mm |
Width across flats 3 (S3) | 36 mm |
Material | Steel |
Surface | Zinc nickel |
Length 2 (L2) | 37 mm |
Length 3 (L3) | 26.5 mm |
Length 4 (L4) | 44.5 mm |
Last viewed
Machine tap HSCo VaryTap blue blind hole DIN 371/376
Set screw, hex sckt, knrld ring cutter inch
Soft wax
Blanco Classic Pro 6 S-IF sink With practical extra basin in central position
Subland stepped drill bit DIN 8374, RN-fine, 90°
Cutting disc, Longlife & Speed For steel
Twist drill bit HSS DIN 338 type RN 130°
CEE extension lead
Slotted flat-head screw DIN 85, A4-70 stainless steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive