90° angled cutting ring fitting ISO 8434-1, stainless steel 1.4571
Angled cutting ring fitting stainless steel 90°
TUBFITT-ISO8434-L-E-A5-D8-M14X1,5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M14 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 500 |
Pipe diameter (D1) | 8 mm |
Diameter 2 (D2) | 6 mm |
Width across flats (S1) | 12 mm |
Material | Stainless steel A5, 1.4571, X6CrNiMoTi17-12-2 |
Length 2 (L2) | 21 mm |
Length 3 (L4) | 14 mm |
Last viewed
Washer ISO 7091 steel 100 HV zinc-plated, blue passivated (A2K)
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon head bolt With thin shaft in hygienic design
Paint spray Quattro
4KS profile double cylinder for keyed alike systems with original equipment
Tap extension In accordance with DIN 3523
Moldex glasses holder 9998
Protective glove, disposable
Edge sanding belt Klingspor PS 29 F ACT