90° angled cutting ring fitting ISO 8434-1, stainless steel 1.4571
Angled cutting ring fitting, stainless steel 90°
TUBFITT-ISO8434-S-EC-A5-D8-M16X1,5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M16 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 800 |
Pipe diameter (D1) | 8 mm |
Diameter 2 (D2) | 5 mm |
Width across flats (S1) | 14 mm |
Width across flats 2 (S2) | 19 mm |
Material | Stainless steel A5, 1.4571, X6CrNiMoTi17-12-2 |
Length (L1) | 32 mm |
Length 2 (L2) | 24 mm |
Length 3 (L3) | 17 mm |
Last viewed
Threaded rod DIN 976
4.8U, hot-dip galvanised
90° angled tube cable lug Standard (similar to DIN)
Steel U-bolt
Reserve taper grooved dowel pin ISO 8741 A1 stainless steel plain
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
2-component thick-film lacquer
Adhesive tape SonusTape for SonusStripe acoustic decoupling strips
Plus Quadro-L hammer drill bit
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Stud screw A2 stainless steel