90° angled cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Elbow cutting ring fitting steel 90°
TUBFITT-ISO8434-S-EC-ST-D30-M42X2
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M42 x 2 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M42 x 2 |
ISO | 8434 |
Nominal pressure PN | 420 |
Pipe diameter (D1) | 30 mm |
Diameter 2 (D2) | 25 mm |
Width across flats (S1) | 41 mm |
Width across flats 2 (S2) | 50 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 63 mm |
Length 2 (L2) | 49 mm |
Length 3 (L3) | 35.5 mm |
Last viewed
Work trousers
Securing clip for Redoslide HW/HNW sliding door fitting set and wood front panel
Cable grommet with perforated membrane CR
Work dungarees
Replacement cross brace For professional aluminium telescopic ladders with cross brace
A 510 FS door handle
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)
Amo® III 7.5 type 3 window frame screw Half round head
Tray shelf
Low-cut safety shoe S3