90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Angled screw-in conn. sst taper. BSP MT 90°
TUBFITT-ISO8434-S-SDE-A5-D10-R3/8
Register now and access more than 125,000 products
 | |
Thread type x nominal diameter x pitch (T1) | M18 x 1.5 |
Thread type 3 x nominal diameter 3 (T2) | R3/8 |
ISO | 8434 |
Nominal pressure PN | 400 |
Pipe diameter (D1) | 10 mm |
Diameter 2 (D2) | 7 mm |
Diameter 3 (D3) | 7 mm |
Width across flats (S1) | 17 mm |
Material | Stainless steel A5, 1.4571, X6CrNiMoTi17-12-2 |
Length 2 (L2) | 25 mm |
Length 3 (L3) | 17.5 mm |
Length 4 (L4) | 28 mm |
Length 8 (i1) | 12 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagon Socket Head Cap Screw
VWM in-front-of-wall mounting system
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Eye bolt with full thread DIN 444, steel 8.8, plain, shape LB
Fluorescent lamp
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Concealed hinge TIOMOS click-on 120
