90° angled male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
Elbow screw-in fitting ST tapered BSP male 90°
TUBFITT-ISO8434-L-SDEC-ST-D12-R1/2
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M18 x 1.5 |
Thread type 3 x nominal diameter 3 (T2) | R1/2 |
ISO | 8434 |
Nominal pressure PN | 315 |
Pipe diameter (D1) | 12 mm |
Diameter 2 (D2) | 10 mm |
Diameter 3 (D3) | 10 mm |
Width across flats (S1) | 19 mm |
Width across flats 2 (S2) | 22 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 36 mm |
Length 2 (L2) | 28 mm |
Length 3 (L3) | 21 mm |
Length 4 (L4) | 34 mm |
Length 8 (i1) | 18 mm |
Last viewed
Straight cutting ring fitting ISO 8434-1, stainless steel 1.4571
Welding studs DIN 34828, steel S235JR, plain, for turnbuckles
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 ISO 4017, A2-70 stainless steel, plain, with nut ISO 4032
Pre-charged NiMH battery
Universal window sealing tape Euraseal U-305
PUR 250 type 175 insulation pipe clamp With screws, a permanent PUR hard foam coating and rubber shell on the inside
Worktop support
LED flashing warning lamp GGVS, tested according to ADR zone 2
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Machines and accessory Van Roij