90° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 90 degree
TUBANGLCBLLUG-90DGR-M10-25SMM
Register now and access more than 125,000 products
- For multi-wire round conductors, e.g. according to DIN EN 60228 class 2
- For round-pressed sector conductors
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 25 mm² |
Flange hole | M10 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 10.5 mm |
Sleeve length (a) | 15 mm |
Width (b) | 18 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Safety boots, S2
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
L-shaped push-in fitting, long version
Resettable fuse, MINI For continuous operation (permanent installation)
Trousers Stretch X
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Twist drill bit HSCo DIN 340 type RN OXIDE
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 ISO 4017, A2-70 stainless steel, plain, with nut ISO 4032