90° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 90 degree
TUBANGLCBLLUG-90DGR-M12-16SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 16 mm² |
Flange hole | M12 |
Wire diameter (d1) | 5.5 mm |
Diameter of hole (d2) | 13.2 mm |
Sleeve length (a) | 13 mm |
Width (b) | 19 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
FT 50 AV folding door fittings set for 1 pair of door leaves
Insect remover
Tool case 32 pieces in system case 8.4.2.
Neck protector
Mounting Plate Tiomos
Lightweight clamping pin
Rechargeable battery LI 3.6 volt/2.0 Ah
Tar rake handle For aluminium tar spreader
Die Ruko HSS DIN EN 22568 Whitworth BSW