90° angled tube cable lug Standard (similar to DIN)
Tubular angle cable lug 90 degree
TUBANGLCBLLUG-90DGR-M8-6SMM
Register now and access more than 125,000 products
- For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
- For round-pressed sector-shaped cables
The fitter must check the inserted cable (by trying to pull it out if necessary).
Datasheets(X)
Wire cross section | 6 mm² |
Flange hole | M8 |
Wire diameter (d1) | 3.5 mm |
Diameter of hole (d2) | 8.4 mm |
Sleeve length (a) | 9 mm |
Width (b) | 15 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Cable clamp, single-lobed according to SN 78550
HSCo8 end mill, short DIN 844K
Self-drilling façade construction screw Sandwich piasta® A2 stainless steel
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Euro containers
Hexagon nut, inch
EPS profile double cylinder
Hand brush, medium
Standard cable connector with metal latch
KPF wide sanding belt, individual