90° connection piece For hard-to-reach lubrication and manifold points
Connection piece 90 degree
FITT-CLS-ANGLPIECE-90D-M8X1KEG-M8X1
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For connection of a line to a lubrication or divider manifold point if an insertable or cutting-ring fitting cannot be screwed in directly.
 | |
Connection thread (d2) | M8 x 1 |
Outlet thread (d) | M8 x 1 tapered |
Width across flats (SW) | 12 mm |
Length (L) | 23 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Glazing packer assortment For long-lasting, professional block setting of glazing units
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Compact workshop trolley
Wire end ferrule with plastic sleeve strips
Multi-purpose drill bit MFD-S Plus
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
EPDM sealing tape Outdoors full-surface SK
Mains cable for USA Sundström R06-0123
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Mounting set For tubular frame fittings on a long plate