90° elbow fitting, tapered sealing EN1254, gunmetal, 4096G
EN1254 gunmetal 4096G
FITT-WKLV-1254-IT-90G-RB-12X3/8IN/4096G
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Air Conditioning and Refrigeration (ACR)
- Compressed air
- Systems for distributing technical and medical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, “wet” DIN 14462
- Sprinkler systems “wet” VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 12 mm |
Nominal diameter 2 | 3/8 in |
Length (a) | 39 mm |
Length 2 (b) | 25 mm |
Length 4 (Z/Za) | 30 mm |
Length 5 (Zb) | 16 mm |
Connection thread | R 3/8 inch |
Connection type | 1. connection internal soldering |
Width across flats (S/S1) | 26 mm |
Width across flats 2 (S2) | 23 mm |
Material | Red bronze - gunmetal |
Surface | Plain |
Last viewed
Hexagonal nut with clamping piece (all-metal) DIN 980, similar to A2 stainless steel, tin-plated (SN)
Jacket Planam MG 260
Twist drill bit HSS DIN 1897 type RN
Ejector pin, core drill Ruko tungsten carbide
Protective glove, disposable
Work vest
Low-cut safety shoes, S1
Knurled thumb screw, low profile
Magnet for SLIM cable chain with rectangular links
Die Ruko HSS DIN EN 22568 Whitworth BSW