90° push-in elbow For Alu-Steck-WES aluminium pipe
90 degree elbow for aluminium pipe
BOW-F.CND-90D-ALU-(PLG-WES)-EN20
Register now and access more than 125,000 products
- Very good corrosion resistance
- Low weight
- With sleeves moulded on both sides, meaning no additional insertion sleeves are required
VDE 0605 and DIN EN 61386-21
Datasheets(X)
Suitable for pipe (EN) | EN 20 |
Classification code for electrical conduit | 4456 |
Load force at 5 cm | 1250 N |
Impact resistance at 300 mm | 2 kg |
Min./max. temperature conditions | -45 to 250 °C |
Material | Aluminium |
Surface | Plain |
Flame-retardant | Yes |
Halogen-free | Yes |
Last viewed
Hose clamp DIN 3017-1, shape A, W2, BASIC-Line
ASSY® Isotop Wood construction screw
Twist drill bit assortment SS DIN 338 type RW, 19 pieces
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Compound plain bush
Hexagon nut with serrated washer inch
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Crepe masking tape
MFD-S centre drill bit For bimetal extra-long cylinder saws
Hexalobular screw with flattened half round head and collar DIN 34805-2, TX drive, A2-070 stainless steel