Welcome to Würth Aerospace Solutions For trade customers only

A2 assembly and parts cleaner

Assembly cleaner 2A
ASMBYCLNR-A2-600ML

Art.-no. 08901094
EAN 4045727623459

Prices for customers after login
A2 assembly and parts cleaner

Art.-no. 08901094

Prices for customers after login
Quantity
PU
x 12 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Workshop-friendly and safe special cold cleaner with high degree of safety

Complies with the recommendation of the relevant professional association in Germany


Flash point can be specifically selected from 40–42°C



Protects against electrostatic discharge


Electric conductivity additive is used



Reduces potential risks in the workplace and the need for hazard labelling


  • Due to solvents with no aromatic compounds

  • Due to use of non-combustible propellant


High cleaning performance


Removes greasy and oily soiling



Acetone-free, AOX-free and silicone-free

Notice

Prior to application, check the compatibility of rubber, plastic parts and painted surfaces on an invisible area.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For cleaning oily, greasy and soot soiling on metal surfaces, glazed ceramics and painted surfaces such as engines and gear housings, vehicle, machine and clutch parts, and wherever particular importance is attached to occupational safety.

Instructions

Spray on to the parts to be cleaned and, depending on the degree of soiling, let it take effect. Then clean the dirt by targeted spraying, or rub-off with a cloth. Then dry with compressed air where necessary.

Contents

600 ml

Smell/fragrance

Mild

Colour

Transparent

Chemical basis

Aliphatic hydrocarbon

Density/conditions

0.75 g/cm³ / Active substance, 20°C

Min. flashing point

40 °C

Acetone-free

No

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information