ABS Lock Falz IV RB ZW
Anchor point ABS Lock IV round flange seam ZW
LOCK SEAM 4 (PF-4-ZW-RB) ZW F. ROUNDSEAM
Register now and access more than 125,000 products
With the ABS-Lock Falz IV round flange seam ZW, you can guide the stainless steel rope of your rope harness system across obstacles. The intermediate holder, for example, is used to guide the rope over the raised roof ridge, so that it is not seated on anything.
Datasheets(X)
- DIN EN 795:2012, C + DIN CEN/TS 16415:2013
- Clamped penetration-free to the seam
- Attachment at only a single seam
- For example BEMO and similar
- Incl. Fastening set
- Only for rope harness systems
This intermediate holder is solely suitable for use as a component in a rope harness system. It is clamped onto the round flange seam with aluminium clamps. As opposed to a single anchor point ABS-Lock Falz IV, this intermediate support only requires one seam for mounting.
Material | Stainless steel |
Rod length | 0 mm |
EN standard | 795 |
Suitable for use in the following materials | Round flange seam |
Type description | PF-4-ZW-RB |
Height | 0 mm |
Surface | Stainless steel FINISH |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
EURASOL® Thermo HT adhesive sealing tape
Washer ISO 7089 steel 200 HV zinc-plated thick-layer passivated with sealing (ZSM)
TIPP® robust pipe clamp, hot-dip galvanised
AL 420 drive handle
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Safety boots, S3
Trapezoidal blade in dispenser
Work jacket