ABS Lock II B and H
Anchor point ABS for window hook Lock II, concrete
LOCK-II-CONCRETE-(L2-B-150)-150MM
Register now and access more than 125,000 products
The ABS-Lock II-B stainless steel mounting sleeve is the counterpart to the ABS-Lock I removable anchor point. The sleeve is available in various lengths and is either bonded into concrete or screwed into wood. With the various angle pieces, you can easily install the ABS-Lock II-B in suspended ceilings. This makes the system excellent for window fall protection. As the end of the sleeve is flush with the ceiling, it does not disturb the aesthetics in your facilitates.
Only usable with Lock I
Datasheets(X)
- General technical approval (abZ) Z-14.9-688 (Observe assembly specifications from the abZ)
- Ü character, DIN EN 795:2012, B + DIN CEN/TS 16415:2017
- For concrete ≥ C20/25
- For wood (beams min. 140 mm x 140 mm)
- CAUTION: Axial loading of the wood variant only possible with locked version.
- Recommended accessories: Composite mortar WIT-VM-250
For windows, the system is the optimal solution. Since the anchor ring can be removed, the windows can be opened without any problems. The anchor point is never in the way. And with our telescopic rod, the ABS-Lock I TelePole, you can easily reach the removable anchor ring conveniently and safely from the ground, even in difficult positions.
The ABS-Lock II-B is supplied with a plug for protection while plastering and a cover made of plastic.
EN standard | 795 |
Surface | Stainless steel FINISH |
Length | 150 mm |
Width | 2 cm |
Height | 150 mm |
Type description | L2-B-150 |
Material | Stainless steel |
Product weight (per item) | 0.340 g |
Last viewed
Split pin DIN 94, steel, plain
Work trousers
Pan head screw with Z cross recess DIN 7985, A2-70 stainless steel, plain
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Stepped drill bit, spiral
Welding plate Part 1 — double version, type DSP
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Hexagonal bolt
Twist drill bit HSS DIN 338 type RN 118°
System insert 2.4.1, socket wrench 1/2 inch TX