ABS Lock II Steel
Anchor point ABS for window hook Lock II, steel
LOCK-II-STEEL-(L2-ST-100)-100MM
Register now and access more than 125,000 products
The ABS-Lock II-ST stainless steel installation sleeve is countered using steel or wood. The installation sleeve is available in a range of different lengths and is the counterpart to the detachable ABS-Lock I anchor point. When combined, the system offers reliable fall protection at the push of a button: The ABS-Lock I anchor eyelet is simply inserted into the sleeve and removed again.
The ABS-Lock II-ST comes with a plug for protection during plastering work. The installation sleeve is also supplied with a plastic cap.
Only usable with Lock I
Datasheets(X)
- General technical approval (abZ) Z-14.9-688
- Ü-numbers DIN EN 795:2012, B + DIN CEN/TS 16415:2013
- For steel and load-bearing wooden constructions
- Beams min. 60 x 120 mm
- Optional: short version (30 mm) with hexagonal collar
EN standard | 795 |
Surface | Stainless steel FINISH |
Length | 100 mm |
Width | 2 cm |
Height | 100 mm |
Type description | L2-ST-100 |
Material | Stainless steel |
Product weight (per item) | 0.350 g |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Sanding disc film Mirka Galaxy
Pan head tapping screw with flange
Lock latch
Window latch
Low-cut safety shoe S3
WÜPOFAST® zinc-plated yellow chipboard screw Steel, zinc-plated yellow, partial thread, countersunk head, PZ
Feather key, high shape DIN 6885, steel, plain, shape B
Support Plate For non-woven discs
Cylindrical pin, unhardened ISO 2338 A1 stainless steel (m6)